Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
2007 Ford Five Hundred
We'll connect you with nearby partnered installers who know this exact setup.
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Part Number: BWGNRK1314
In Stock
$699.00
Retail:$740.39
You Save: $41.39
2007 Ford Five Hundred
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (5039)
- Q & A (0)
- Photos
B and W Gooseneck Hitch - BWGNRK1314
Highlights
- Custom Fit for Your Vehicle: Mounts to existing attachment points
- Built for Heavy-Duty Weight: Rated for 30,000 lbs GTW and 7,500 lbs vertical load.
- Full Truck Bed Access: Pull the handle, flip the 2-5/16" ball, and drop it back to get your bed back.
- Locks Solid for Towing: Spring-loaded 5/8" steel pin slides through the ball for a tight connection.
- Aligns Smoothly and Stays Put: Square ball base won’t spin in the socket so hookup is quick and consistent.
- Installs Cleanly Under the Bed: Bolts to existing frame holes; no welding or bed removal needed.
Features to know about
Built for Heavy Loads: 30,000 lbs GTW and 7,500 lbs Vertical Load
Rated for a 30,000-lb gross towing weight and 7,500-lb vertical load limit, this hitch is made for serious towing. The single-piece, machined ball socket gives you a tight, durable connection that stays solid when you’re hauling heavy livestock, dump, or fifth-wheel trailers. The square ball base keeps the connection steady and prevents any rotation when you’re backing or coupling under load.
Full Bed Access When You're Not Towing: Flip-Over Ball Design
When you’re done towing, pull the handle, lift out the 2-5/16" ball, flip it upside down, and drop it back into the hitch. The Turnoverball design stores the ball below the bed surface so you can use your truck bed freely. No bulky hardware sitting in the way—just a flat surface ready for hay bales, toolboxes, or whatever else the day calls for.
Quick Locking From the Wheel Well: 5/8" Steel Pin and Spring-Loaded Handle
The locking handle sits right inside the rear driver’s-side wheel well so you can secure or release the ball from the side of the truck. A spring-loaded 5/8" thick steel pin slides completely through the ball base to lock it down tight. The square design of the hitch ball makes it easy to line up and latch while stopping rotation in use. Built-in spring-loaded safety-chain hookups stay out of the way but are ready when needed.
Simple, No-Weld Installation: Custom Mounting Kit Included
The installation kit bolts to existing holes in the frame—no welding or bed removal required. You’ll just cut a 3-1/2" diameter hole for the ball and drill openings for the safety chain loops. The powder-coated steel construction resists corrosion and holds up to years of towing use. Accessories sold separately make it easy to customize with offset or raised balls, or even add a B&W Companion fifth-wheel adapter when needed.
Specs
Weight and Capacity
- Gross towing weight: 30,000 lbs
- Vertical load limit: 7,500 lbs
Dimensions
- Ball size: 2-5/16"
Warranty
- Limited lifetime warranty
GNRK1314 B and W Turn Over Ball Under-Bed Gooseneck Trailer Hitch - 30,000 lbs
Great Alternative Reese Elite Series and Draw-Tite Hide-A-Goose Gooseneck Trailer Hitches
This Product Fits The Following Vehicles
- 2013 - 2018 Ram 3500 6-1/2 Foot Bed without OEM Prep Pkg
- 2013 - 2018 Ram 3500 8 Foot Bed without OEM Prep Pkg
- 2013 - 2014 Dodge Ram Pickup 3500 - 6-1/2 Foot Bed without OEM Prep Pkg
- 2013 - 2014 Dodge Ram Pickup 3500 - 8 Foot Bed without OEM Prep Pkg
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- etrailer mistake
Ratings & Reviews
4.8
5039 reviews
by:
Mack
07/28/2026
2014
Dodge
Ram Pickup
Install was pretty easy, the latch bracket needed to be bent a bit but over all pretty straightforward
by:
Brent F
07/29/2019
2016
Ram
3500
The Hitch came faster than expected
It took about 2 hours to install
thanks to etrailer's [on-line video]instructions
very happy
It took about 2 hours to install
thanks to etrailer's [on-line video]instructions
very happy
by:
Kenny
01/13/2026
Product is great and installation was as expected. Took me most of a day as I was not in a hurry and would watch videos before most steps. The reason for a 4 star rating is due to having to tweak the ball release lever as it was hitting one of the installation bolt. Customer service was 5 star for sure.
by:
David Schreck
04/14/2017
2017
Ram
3500
I love this setup. It didn't take me long to install it. Everything went super smooth. If your needing a hitch get this!!!
by:
Jacob
10/31/2025
2017
Ram
3500
Excellent kit! It's as if B&W worked with Dodge engineers on this GNRK1314 kit!
by:
Lee
10/02/2016
2011
Honda
Pilot
The E-trailer videos and instuctions are great! I would suggest going ahead and removing the spare tire heat shield to make life easier with the torque wrench and when drilling the safety chain holes. The other item I am glad I caught before installing my hitch is the size of the hole they want you to use. B&W suggest a 3-1/2" hole and provide a plastic spacer to kinda hide the gap, I didn't like the idea of how this was going to look. I still installed the plastic spacer to support the bed around the hole, but I used a 3-1/4" hole saw and very lightly filed the edges for a much better fit. (Just make sure you hit your pilot hole location.) Test fit the hitch from the top side when checking the hole size. When installing, tighten the bolts to where the hitch just starts to make contact with the frame and then go top side and check hitch/hole alignment. Tap the hitch around with a mallet if you need to line it up with the hole. (Once the hitch was tight it didn't protrude through the bed anyways, so the hole could have been small and still worked). After removing the exhaust hanger, I used a ratchet strap to pull the tail pipe towards the spring to allow access to drill the passenger side safety hook holes. Another tip, I used a piece of rope tied to the ball retaining pin and fed it up through the hole in the bed. My 11 year old son was able to hold it in place this way while I started the bolts. I am happy with the end results and it looks great! The one thing I feel could be better is how far the ball retaining pin protrudes into the second side of the hitch housing, on mine I only have about 1/4" into the second side. I would feel better with 3/8"-1/2" engagement.
Lee S.
10/3/2017
Working out great. Many a mile with trailer in tow.
by:
Tom
12/03/2020
It was easy to install and works great, glad I got it.
Thomas H.
12/4/2021
Great, just like its supposed to.
by:
Sean
04/24/2020
2017
Ram
3500
Love the new hitch. Easy to install on my new truck so I can continue to pull my trailers and 5th wheel with my companion hitch as well. Etrailer is my go to for towing needs.
Sean A.
5/2/2021
Still works like a champ no issues at all.
by:
Zack P
02/01/2020
Using this product in conjunction with an Anderson fifth wheel hitch. Works great! Haven't had any issues. Would recommend it to anyone looking for a solid Goose neck hitch.
Zack P.
2/6/2021
B&W gooseneck hitch is working out great. No issues.
by:
Jim
11/21/2016
2016
Volvo
Cross Country
We've traveled cross country, twice, and over 10,000 miles towing and this has been the best hitch we've had yet. The roads aren't smooth and the 16,000 lb of our fifth wheel has ridden smooth and without chucking/bumping. We have the steel version and very glad we decided to purchase this hitch instead of the typical saddle type 5th wheel hitch we've used before. The captured photo attached is from our rear dash cam while transporting.
by:
Brad P
01/02/2020
Dodge
Ram Pickup
B and W makes the best products. I am willing to pay a little extra to buy B and W over other manufactures as the quality and build is outstanding. I bought this item as well as their 5th will puck hitch. Couldn't be happier, works exactly like its supposed to. One note is on my previous Ram I had the factory gooseneck and the ball would spin in the hitch, wearing it out. On the truck I have now, I specifically bought it without the factory hitch so I could put B and W's hitch in which is MUCH better!!
by:
Tim B
02/06/2015
2014
Ram
3500
This is the first product in a very long time that actually exceeded my expectations. First of all it is Made in the USA. Second, it was clearly made by people who not only know what they're doing but take great pride in their work as well. The fit and finish were perfect. I watched B & W's install video on YouTube and was again pleasantly surprised that it was relevant to the exact product I bought. Installation was very straight forward and, again, there were no surprises as between the video and the included instructions B & W had all their bases covered. Even though I didn't have extra help nor B & W's installation tool I was able to innovate with some 5/8" threaded rod and a couple nuts I had laying around. Everything fit together so perfect I was able to complete the installation in around 2 hours with a not-fully-recovered ruptured disc in my back. I have had this in my truck for several months now and I still think it's absolutely fantastic. It is hell for stout and simple to operate. Thank you so much B & W!
Lets also not forget etrailer. It almost goes without saying that their service and shipping are prompt and courteous.
Lets also not forget etrailer. It almost goes without saying that their service and shipping are prompt and courteous.
by:
Happy Customer
02/14/2015
2014
Dodge
Ram Pickup
etrailer not only have a great procedure for online trading or online store, but also a great website....people on similar business can appreciate that as per other this feature can be transparent for them...it takes a great effort of team work to accomplish what this level of a,b,c,d online process to be done the way of etrailer has done.
The products are simply well described, well packed, fast shipping. Whether is in stock or direct ship from manufacture, they make it look like is nothing..to me another great team effort and well though software architecture.
As often we find instructions from manufacture to be some confusing, etrailer back it up which bunch of literature and videos to easy the process.
Device recommendations:
I strongly recommend that anyone purchasing this item to purchase also the harness kit, installation is plug and play and it looks part of another factory install.
Cons: The part where every instruction or videos said "remove the clamp of the exhaust pipe to move exhaust pipe over" I found that is extremely difficult to accomplish that procedure on a 2014 3500 Ram with a Diesel Engine which it has the extra exhaust regeneration device or so call DPF...where fuel exhaust particles are burn, etc. that makes my vehicle exhaust to be solid almost one foot before reaching my rear end axle, meaning location where I need to be working installing my under bed gooseneck hitch.
I did not removed any exhaust clamps and I simply got me a short 22 mm and tight my bolts with a wrench and a hammer.
NOTE: ABS harness bracket it looks like is going to be rubbing against the hitch and it is extremely close, but it does not once bolts are tight you will have about 1/2 clearance (will not rub).
Last comments, everything fits and everything goes where is says instructions, do not remove your bed of cut your truck in half..jejejejej
Good luck, hope I help someone God Bless
The products are simply well described, well packed, fast shipping. Whether is in stock or direct ship from manufacture, they make it look like is nothing..to me another great team effort and well though software architecture.
As often we find instructions from manufacture to be some confusing, etrailer back it up which bunch of literature and videos to easy the process.
Device recommendations:
I strongly recommend that anyone purchasing this item to purchase also the harness kit, installation is plug and play and it looks part of another factory install.
Cons: The part where every instruction or videos said "remove the clamp of the exhaust pipe to move exhaust pipe over" I found that is extremely difficult to accomplish that procedure on a 2014 3500 Ram with a Diesel Engine which it has the extra exhaust regeneration device or so call DPF...where fuel exhaust particles are burn, etc. that makes my vehicle exhaust to be solid almost one foot before reaching my rear end axle, meaning location where I need to be working installing my under bed gooseneck hitch.
I did not removed any exhaust clamps and I simply got me a short 22 mm and tight my bolts with a wrench and a hammer.
NOTE: ABS harness bracket it looks like is going to be rubbing against the hitch and it is extremely close, but it does not once bolts are tight you will have about 1/2 clearance (will not rub).
Last comments, everything fits and everything goes where is says instructions, do not remove your bed of cut your truck in half..jejejejej
Good luck, hope I help someone God Bless
by:
Jim F.
03/28/2015
2014
Dodge
Ram Pickup
The B&W Turnover ball hitch kit for my 2014 Ram 3500 was very well engineered to fit precisely in my truck's frame and appeared to be well constructed in all respects. It was definitely no cake walk in the installation department and not recommended to be taken on by a non professional unless you are confident in your mechanical skills. I did it alone. The directions recommend the job be done by two. Good advise. The directions described a couple of things as "optional", like removing the spare tire and heat shield and removing exhaust donuts. Definitely NOT optional! But all in all it went well, turned out excellent. Great American made product, and has my seal of approval.
by:
Jim S
08/30/2020
Dodge
Ram Pickup
I replaced the RAM stock gooseneck hutch with this B&W as the stock hitch started to move around when towing and I liked the more positive way the pin holds the ball in on the B&W.
by:
Taylor S.
07/23/2017
2015
Ram
3500
We've been running this B&W hitch for 18 months now and love it. The install is much easier on the 2013+ Rams compared to previous generations that needed the added cross-members. Just be prepared to spend a bit of time drilling through the factory cross-member for the safety chain anchors.
by:
Douglas
09/30/2021
I removed the factory “puck system” ball to install this one. Install was easy once I had the OEM hitch removed. I use weekly with ball and B&W Companion fifth wheel. I’ve never had any problems with it.
by:
Adam
05/07/2018
2017
Ram
3500
B & W know what they are doing, great hitch! Installs even easier than they lead you to believe and the finished product is top notch.
Adam
5/7/2019
Still does exactly what it is supposed to do.
by:
Bert
10/02/2017
2016
Ram
3500
These are great hitches. This is fourth one I have bought and installed. My only complaint is that the ball in this one binds in the square hole in three out of four positions so it has to go in one way only. None of the others did this, they could be inserted in any of four positions. Quality control? Thus four stars.
by:
John
06/01/2018
Ordered the same time as I ordered the B&W Companion 5th Wheel:
Ordered from E-Trailers.com and the prices was the best experience.
George called to let me know that my order was possessing at be would be sent. Didn't expect the at call..
The order arrived and it was all perfect. Installed without any problems. This was the best purchase online I have ever made.. thanks George J.
Ordered from E-Trailers.com and the prices was the best experience.
George called to let me know that my order was possessing at be would be sent. Didn't expect the at call..
The order arrived and it was all perfect. Installed without any problems. This was the best purchase online I have ever made.. thanks George J.
by:
Ruben
11/11/2018
2018
Ram
3500
Very satisfied with this product. Getting ready to put it to work. Also purchased the gooseneck wiring harness, only issue was that The mounting part was damage. This does not interfere with it’s function so overall happy with these items.
by:
Matthew
04/05/2022
Love the 5th wheel hitch. Works great, easy install, and an added bonus with this hitch is it sits forward a couple images more than the factory hitch so it has better weight transfer onto the truck. Thanks again
by:
Danville
11/30/2014
This hitch went on just like it says. Did not have to remove spare tire or the heat shield....but you will have to pry the exhaust out of the hangar but that is no problem at all. If you have access to a lift that will help a great deal. I put truck on lift and with a friend helping we had it on in about 1 1/2 hours.....Great hitch.
by:
Ben
12/22/2021
This definitely is not a plug and play mechanism.
There is interference with the lever to unlock the ball and it hitting one of the bolts. I had to shave the bolt down to make it even slide by, in addition to this I had to cut about 1/4” off the mechanism lever for it to open all the way and not hit the bracket on the truck.
So in summary I had to make two cuts into the product to make it even function properly.
Poor quality control.
There is interference with the lever to unlock the ball and it hitting one of the bolts. I had to shave the bolt down to make it even slide by, in addition to this I had to cut about 1/4” off the mechanism lever for it to open all the way and not hit the bracket on the truck.
So in summary I had to make two cuts into the product to make it even function properly.
Poor quality control.
Jenny N.
12/27/2021
I will have our customer service team reach out to you.
by:
Mark D.
11/09/2016
2016
Ram
3500
2016 Dodge 1 Ton received fast installed easy, instructions were helpful but the etrailer video made it a step by step install. great hitch for the money.
25
5039
true
Show More Reviews
See what our Experts say about this B and W Gooseneck Hitch
- Can Truck with Body Lift Tow Trailer with Gooseneck HitchHey James, so towing a trailer with an in-bed hitch with a truck that has any type of lift gets pretty complicated pretty quickly. The problem you found is one reason. For body lifts there's not really anything you can do aside from maybe some type of modification to the hitch but that would be uncharted waters for us. Best option is honestly remove the lift kit as lift kits and towing is just a lot of headache. Second best option is go with a suspension lift instead of the body lift...
view full answer... - Fifth Wheel Hitch and Tonneau Cover Recommendation for 2017 Ram 3500 with Short BedFor your 2017 Ram 3500 6-1/2 Foot Bed without Factory Rail Kit you'll need a slider hitch to allow you to make tight turns without cab interference. My favorite slider hitches are the ones that automatically slide as you make tight turns as that saves you the hassle of getting out and activating the slider every time it's needed. For that I would recommend the Demco Hijacker part # DM8550037 and the install rail kit part # DM8551006. This is an underbed rail kit too which means when you...
view full answer... - Best Fifth Wheel Hitch Solution for Truck with B and W Turnoverball Ball HitchB and W makes their Companion hitches which were designed to fit directly to their gooseneck hitches like the # BWGNRK1314 you have installed in your truck. If you have a long bed truck you'd want the # BWRVK3400 or if you have a short bed truck and would need the additional clearance to make tight turns. If you have a long bed truck you'd instead want the fixed version of this hitch part # BWRVK3500.
view full answer... - Replacement Safety Chain U-Bolt Kit for B and W Gooseneck Hitch 1314Hey Tony, the correct safety chain U-bolt kit you need for your B and W Turnoverball hitch part # BWGNRK1314 is the part # BW1900-2-1600. Did yours break in action??
view full answer... - Troubleshooting Stuck Turnoverball Safety Pin with B&W Companion Slider 5th Wheel Hitch Attached I reached out to my contact at B&W regarding the issue you're having with the safety pin on your Turnoverball Gooseneck Hitch # BWGNRK1314 with the Companion Slider # BWRVK3400 mounted. He said it sounds like the draw-down bolt on the slider base might just not be loosened up all the way. In order to remove the safety pin on the Turnoverball, the draw-down bolt on the Companion first needs to be loosened or the pin will not disengage. I have attached an image that points out the draw-down...
view full answer...
- Can a B&W Companion 5th Wheel Hitch from a Chevy Silverado Fit a 2018 Ram 3500 Long BedThe part number you provided, which in our system is # BWRVB3500, is just the replacement base for the standard Companion hitch which is # BWRVK3500. If they are selling just the base then you will also need the head which is # BWRVC3006. Your 2018 Ram 3500 would also need to have a B&W gooseneck hitch installed to use the Companion. For your truck it is # BWGNRK1314. If you have the factory installed gooseneck hitch then the Companion hitch and base listed above will not fit. Instead...
view full answer... - What Rail Kit Does B and W Companion Hitch for Ram Rail Kit FitThe Companion hitch part # BWRVK3670 that is in the question you mentioned only fits the OEM rail kit that Ram/Dodge would have put in the truck. If the truck ends up having a different brand gooseneck hitch you'd have to go a different route but that would depend on what brand hitch it is.
view full answer... - Recommended Aftermarket Type Puck System for a 2016 Ram 3500 Hey Jerod. I don't have an aftermarket puck system for you but I do have something similar that will work. It's the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit item # BWGNRK1314. This underbed system is custom fit for your 2016 Ram 3500 and allows you to store the 2-5/16" hitch ball upside down and inside your bed when you are not using it. This gives you full access to your bed when you're not towing, like in the picture shown below. With the Turnoverball...
view full answer... - B&W Gooseneck Hitch and 5th Wheel Hitch Combo for a 2018 Ram 3500Hey Rocky, thanks for reaching out! The correct B&W Turnoverball Underbed Gooseneck Trailer Hitch for your 2018 Ram 3500 is the Kit # BWGNRK1314 as long as you don't have an OEM hitch. Then for a 5th wheel hitch, you'll need to use the Companion # BWRVK3500 if you have a long bed, or the Companion # BWRVK3400 if you have a short bed. What kind of MORryde pin box do you have?
view full answer... - 5th Wheel Hitch for 2015 Ram 3500 Short BedHi Kevin; bed size isn't too important since you can use a 5th wheel hitch either way. I would personally get a long bed but if there was a good deal on a short bed I wouldn't pass it up. The only thing I really wouldn't want on a Ram is the Rambox. For a 5th wheel hitch I recommend the B&W Companion. This is a high quality 5th wheel hitch that will give you a great towing experience. If the truck has the factory prep package you can use the # BWRVK3670. If it does not have the factory...
view full answer... - Recommended 5th Wheel and Pin Box for a 2018 Ram 3500 W/ RamBoxesEric, from what I understand as long as the Gooseneck clears the bed then you can use the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1314 with the RamBoxes.
view full answer... - Recommended Taller Gooseneck Ball for a B&W Gooseneck Hitch Yes, B&W does make a taller hitch ball. It is the 1" High-Rise Ball for B&W Turnoverball Gooseneck Trailer Hitch item # BWGNXA2050 which is 5-1/16" tall. The ball included with the item # BWGNRK1314 is 4-1/6 tall. This is measured from the bottom of the truck bed. No other manufacturer is compatible with B&W's hitches. You can also use the B&W Turnoverball with 4" Offset item # BWGNXA4085, which is right at 5-3/4" tall from the base of the truckbed to the top of the ball. This gooseneck...
view full answer...
- Recommended Offset Ball for Clearance w/ a Short Bed Truck and a Reese Goose BoxCongrats on the new hobby! A Reese Goose Box like item # RP85FR doesn't do much to help you with clearance and you will want all the help you can get with a short bed truck. You have two options to get more clearance when turning or backing in with your 2018 Ram 3500 with a 6-1/2' bed and I have listed them below: The first option, and the one I highly recommend if you don't already have a Reese Goosebox, is to not change out the king pin on your 2021 Alliance Paradigm 340RL and use a...
view full answer... - How To Tell If a 2018 Ram 3500 Has the Prep Package For Gooseneck Hitch InstallThe factory prep package on a 2018 Ram 3500 is pretty apparent so odds are you don't have this if you are unsure. If the indentations for the four outer pucks and center gooseneck hitch ball are present but there are no actual holes in the truck bed then you don't have the factory prep package. The factory prep package has the indentations but there are covers over each of the holes which you remove to install the hitch ball/safely chain loops or fifth wheel hitch. In other words, if you...
view full answer...
- B&W Turnover Ball Gooseneck Hitch and In Bed Wiring Harness For A 2016 Ram 3500 The B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1314 is the one you need for your 2016 Ram 3500 Dually. This is specifically designed to fit either a 6-1/2' or 8' bed that does not have the OEM prep/puck hitch system in the bed. The Center Section # BWGNRC920 that you found is for replacement piece for a B&W Turnoverball Kit # BWGNRK1020 that fits 2020-2021 Chevrolet/GMC Silverado/Sierra 2500HD/3500HD pickups. Don't forget the Curt 5th Wheel/Gooseneck Custom Wiring Harness...
view full answer... - Will Demco AutoSlide 5th Wheel Hitch Fit with B&W Turnoverball Gooseneck Hitch?The Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 21,000 lbs # DM8550035 is not compatible with the B&W turnoverball gooseneck hitch # BWGNRK1314. The handle for the gooseneck ball will not work with the 5th wheel rails in place according to my contact at B&W. Unfortunately you will need to choose between them. If you go with the above bed rails, I recommend the Reese Quick-Install Custom Base Rails and Installation Kit for 5th Wheel Trailer Hitches...
view full answer... - Which B&W Turnoverball Gooseneck Hitch Fits A 2007 Dodge Ram Mega Cab?The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1308 you mentioned is currently the only B&W Gooseneck Hitch that is confirmed to fit your 2007 Dodge Ram Mega Cab. This hitch will allow you to tow a gooseneck trailer via the included gooseneck ball, but since Mega Cab trucks all have a 6-1/2' bed you will likely need the 4" Offset Ball # BWGNXA4085 to give you more turning clearance. In addition you can also tow a 5th wheel trailer...
view full answer... - What Size Hole Saw Is Needed To Install B&W Turnoverball BWGNRK1314 In 2018 Ram 3500?To install the B&W Turnoverball Gooseneck Hitch # BWGNRK1314 in your 2018 Ram 3500 you will need to drill a 3-1/2" diameter hole for the gooseneck ball to stick up through. Included is an installation video on a 2018 Ram 3500, and a link to the instructions that go over the exact measurements needed to locate the correct location for the hole.
view full answer... - Can The Demco Recon 5th Wheel Hitch Work In A 2016 Ram 3500 Short BedHi Troy, While the Demco Recon 5th Wheel Trailer Hitch # DM8550045-5W will technically fit/mount in the bed of your 2016 Ram 3500, I don't recommend it. Having a short bed means the pivot point for the trailer it closer to the cab which means you could accidentally hit the cab with the nose of the trailer when making a tight turn. Instead you'd really want a sliding 5th wheel hitch like the B&W Patriot # BWRVK3270. This hitch requires base rails # BWRVK2605 in order to mount so you'd...
view full answer... - Installation Video for the B&W Turnoverball Underbed Gooseneck Trailer # BWGNRK1314I have attached the video that you are referring to as well as a video of the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit # BWGNRK1314 being installed on a 2017 Ram 3500. You will be able to install this hitch even with the self-leveling airbags.
view full answer... - Which B&W Turnoverball Gooseneck Hitch Fits A 2012 Ram 3500 DRW With 6-1/2' Bed?I have another option for you but the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1314 you were looking at is only confirmed to fit the 2013-2018 Ram 3500 and will not fit your 2012 Ram 3500. Instead you will need the # BWGNRK1308 if your Ram has a gasoline engine or # BWGNRK1313 if it has the diesel engine. The B&W Turnoverball is the best gooseneck hitch currently on the market due to allowing you to store the ball upside down in...
view full answer... - Fit of Draw-Tite Hi-Rise Gooseneck to 5th Wheel Adapter w/ B&W Turnover Ball Gooseneck HitchI've confirmed with Draw-Tite that their Hi-Rise Gooseneck to 5th Wheel Hitch Adapter, part # 9480 is indeed compatible with the # BWGNRK1314 B & W Turnover Ball Gooseneck Hitch. Keep in mind that you'll be limited to the 18K capacity of the Hi-Rise Adapter.
view full answer... - Recommended Truck for Towing a 20,000 lb 5th Wheel TrailerThere are many Heavy Duty/Super Duty 1 ton trucks that can tow 20,000 lb 5th wheel campers cross country. I recommend getting a long bed truck and getting the factory prep package so you will have a clean bed for other uses when not towing. If you do this, you will need to get a 5th wheel hitch compatible with the puck system in the truck you choose or at least get the rail adapter if you already have a hitch compatible with the trailer weight. If you let me know what vehicle you choose,...
view full answer... - How to Determine if Replacement B&W Turnoverball Will Fit Gooseneck Hitch on 2018 Ram 3500The Replacement Hitch Ball for B&W Turnoverball Underbed Gooseneck Hitches # BWGNXA2000 will fit if your 2018 Ram 3500 Dually has the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1314. This is very easy to determine because the receiver will be 2-1/2" square (see attached) plus the gooseneck hitch brackets would have B&W posted on them. If you have a circular receiver you have a different gooseneck hitch which won't accept the Turnoverball. Should this be the case just let...
view full answer...
Do you have a question about this Gooseneck Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Jared G
Test Fit:
Brent H
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Zach D
Written by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chad S
Video Edited:
Chris R
Video Edited:
Jonathan Y
Updated by:
Adele M
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Kristina F
Updated by:
Michael B
Updated by:
Noah M
Installed by:
Steven C
Installed by:
Ryan G
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brent F.
7/30/2020
Works Perfect